ZVIZZER„Trapez” Pad

Blue: Stable Hard pad
Zvizzer Stable Hard pad blue Trapez is a pad for polisher with high abrasiveness.
It is therefore ideal and perfectly suited for difficult corrections and hard varnishes with significant defects.
In comparison to the red pad of similar abrasiveness, this blue pad is more “stable” insofar as it loses little firmness when it rises in temperature.
Use with Zvizzer Pre Cut Deep Scratch Remover polish (or Heavy Cut Scratch Remover).

Red: Heavy Cut
Zvizzer Heavy cut pad red Trapez is a pad for polisher with high abrasiveness.
It is therefore ideal and perfectly suited for difficult corrections and hard varnishes with significant defects.
Use with Zvizzer Heavy Cut Scratch Remover polish or with another hard polish of your choice.

Orange: Medium Cut
Zvizzer Medium pad orange Trapez is a pad for polisher with medium abrasiveness.
It is therefore ideal and perfectly suited for moderate corrections or for soft varnishes.
Thanks to its intermediate abrasiveness and flexible foam, it can also be used with the appropriate polish such as Zvizzer Medium Cut One Step or any other medium / one step polish of your choice.

Yellow: Fine Cut
Zvizzer Medium pad orange Trapez is a pad for polisher with medium abrasiveness.
It is therefore ideal and perfectly suited for moderate corrections or for soft varnishes.
Thanks to its intermediate abrasiveness and flexible foam, it can also be used with the appropriate polish such as Zvizzer Medium Cut One Step or any other medium / one step polish of your choice.

Green: Ultra Fine Cut
Zvizzer Ultra Fine pad green Trapez is a pad for polisher with very low abrasiveness.
It is therefore ideal and perfectly suited for the finishing step in order to “bring up” the shine and get even more depth than with a classic finishing pad.
It also makes it possible to apply a protection (natural wax or synthetic wax) or a glaze (polisher) with the polisher.
Use with Zvizzer Ultra Fine Cut Swirl Remover & Sealing polish or any other ultra-finish polish of your choice.

The TRAPEZ range of pads is perfect for orbital polishers (Dual Action), also called eccentric polishers.
First of all, the trapezoidal shape allows to have an unequaled support and “seat” mainly with orbital polishers which require to have their backing plate and therefore their pad as parallel as possible with the bodywork.

The central hole on the 80 / 95mm, 125 / 145mm and 150 / 165mm pads limits the deformation of the pad when it heats up and allows better heat distribution.

Unlike most trapezoidal shaped pads on the market, TRAPEZ Zvizzer pads are beveled all around the pad that is in contact with the body. Without this, the edges are very protruding and are damaged more easily especially if they touch sideways another element than the one being corrected.

Zvizzer, it is above all a system entirely designed to simplify your task and avoid errors thanks to a color code (blue / red / orange / yellow / green) common to pads, microfibers and polishes.
The Zvizzer combo (pad/polish) has been developed to be perfectly compatible and therefore provide the best possible result whether for an intensive correction, light or even a finish.

Sizes available for the TRAPEZ Zvizzer range:
The dimensions are expressed as follows (velcro dimension / work surface foam dimension / pad thickness)
35 / 55 / ​​20mm
55 / 70 / 20mm
80 / 95 / 15mm
80 / 95 / 25mm
125 / 145 / 15mm
125 / 145 / 25mm
150 / 165 / 15mm
150 / 165 / 25mm

The 15mm and 25mm pads designed for the Autotriz Kit are in the NANO Zvizzer range.

Backing plates to be used for TRAPEZ Zvizzer pads:

For 35 / 55mm pads (therefore 35mm on the velcro side), a 30mm backing plate should be used.
For 55 / 70mm pads (therefore 55mm on the velcro side), a 50mm backing plate should be used.
For 80 / 95mm pads (so 80mm on the velcro side), a 75mm backing plate should be used.
For 125 / 145mm pads (so 125mm on the velcro side), a 125mm backing plate should be used.
For 150 / 165mm pads (so 150mm on the velcro side), a 150mm backing plate should be used.

Zvizzer is the brand of one of the few manufacturers of pads for polishers in Europe. The rigor and quality of design of the pads are excellent.
All Zvizzer pads are designed and manufactured in Germany and are compatible with all brands of polish known in the world of Detailing.