ZVIZZER Standard” Pad

Blue: Hard
Zvizzer Standard Hard pad Classic blue is a pad for polisher with high abrasiveness.
It is therefore ideal and perfectly suited for difficult corrections and hard varnishes with significant defects.
In comparison to the red pad of similar abrasiveness, this blue pad is more “stable” insofar as it loses little firmness when it rises in temperature.
Use with Zvizzer Pre Cut Deep Scratch Remover polish (or Heavy Cut Scratch Remover).

Red: Zvizzer Heavy Cut
Zvizzer Heavy cut pad Classic red is a pad for polisher with high abrasiveness.
It is therefore ideal and perfectly suited for difficult corrections and hard varnishes with significant defects.
Use with Zvizzer Heavy Cut Scratch Remover polish or with another hard polish of your choice.

Orange: Medium Cut
Zvizzer Medium pad orange Classic is a pad for polisher with medium abrasiveness.
It is therefore ideal and perfectly suited for moderate corrections or for soft varnishes.
Thanks to its intermediate abrasiveness and flexible foam, it can also be used as a One Step pad with the appropriate polish such as Zvizzer Medium Cut One Step or any other medium / one step polish of your choice.

Yellow: Fine Cut
Zvizzer Fine pad yellow Classic is a pad for polisher with low abrasiveness.
It is therefore ideal and perfectly suited for the finishing step which “brings up” the shine and removes the holograms.
Use with Zvizzer Fine Cut Hologram Remover polish or another finishing polish of your choice.

Green: Ultra Fine Cut
Zvizzer Ultra Fine pad green Slim is a pad for rotary polisher with very low abrasiveness.
It is therefore ideal and perfectly suited for the finishing step in order to “bring up” the shine and get even more depth than with a classic finishing pad.
It also makes it possible to apply a protection (natural wax or synthetic wax) or a glaze (polisher) with the polisher.

Everything is implemented so that this pad is most effective: quality of the foam, open cell structure, color of the foam, between the specific adhesive and the foam Velcro …

The Stable Hard pad Classic of Zvizzer can be used with a rotary polisher, an orbital polisher or by hand with a manual velcro interface but it is with rotary polishers that it will be most effective.

Zvizzer is above all a system fully designed to simplify your task and avoid errors thanks to a color code ( blue / red / orange / yellow / green ) common to pads, microfibers and polishes.
The Zvizzer combo (pad / polish) has been developed to be perfectly compatible and therefore provide the best possible result whether for an intensive correction, light or even a finish.

Sizes available for the Classic Zvizzer range :
The dimensions are expressed as follows (velcro dimension / work surface foam dimension / pad thickness)
76 / 80 / 20mm
140 / 150 / 20mm
150 / 160 / 25mm

Backing plates to be used for Classic Zvizzer pads :
For 76 / 80mm pads (so 76mm on the velcro side), a 75mm backing plate should be used. Thanks to its shape, the work surface is 80mm and allows all risks to be reduced to a minimum.
For 140 / 150mm pads (therefore 140mm on the velcro side), a 125mm backing plate should be used. Thanks to its shape, the work surface is 150mm and allows all risks to be reduced to a minimum.
For 150 / 160mm pads (so 150mm on the velcro side), a 150mm backing plate should be used. Thanks to its shape, the working surface is 160mm and allows all risks to be reduced to a minimum.

Zvizzer is the brand of one of the few manufacturers of pads for polishers in Europe. The rigor and quality of design of the pads are excellent.
All Zvizzer pads are designed and manufactured in Germany and are compatible with all brands of polish known in the world of Detailing.